





Deck Pad
$29
Soft EVA traction with 3M backing for peel and stick applications.
When replacing an old deck pad, use mild heat to pull up the old existing traction. You can also try to remove all the glue residue with a degreaser (like StarStuk ACR Citrus Adhesive Remover) but if that isn't possible then just make sure surface is clean and smooth before applying the new deck pad. The 3M glue is extremely tacky so be careful when positioning the new deck pad and lay down from one end to the other to prevent trapping air bubbles. After applying deck pad, use an X-Acto knife to cut out the handle opening.
The first two numbers of your board's serial number (located near the fin box) represent the model year of the board. Choose the matching year deck pad in the drop down menu below.
When replacing an old deck pad, use mild heat to pull up the old existing traction. You can also try to remove all the glue residue with a degreaser (like StarStuk ACR Citrus Adhesive Remover) but if that isn't possible then just make sure surface is clean and smooth before applying the new deck pad. The 3M glue is extremely tacky so be careful when positioning the new deck pad and lay down from one end to the other to prevent trapping air bubbles. After applying deck pad, use an X-Acto knife to cut out the handle opening.
The first two numbers of your board's serial number (located near the fin box) represent the model year of the board. Choose the matching year deck pad in the drop down menu below.